هارون عبد الكاظم شهد الجنابي

السيرة المهنية

BIO-DATA

Name : Dr. Haroun A.K. Shahad
Nationality : IRAQI
Religion : Muslim
Age : 59 years
e-mail : hakshahad@yahoo.com
Correspondence Address :
Haroun A. K. Shahad
College of Engineering
University of Babylon
Hilla P.O. Box 4
Babylon , IRAQ
Married with 3 children
Mobil phone: 07801020557
Scientific Status
Professor of power engineering from 10th May 2006
Associate Prof. 1999 –2002 (Higher Institute of Mech. And Elect. Eng., Hoon /Libya)
Assistant Prof. 1993-1999 (University of Babylon)
Lecturer 1984-1993 (University of Basrah)

Degrees obtained
Ph.D. UMIST/ England 1983
M.Sc. UMIST/ England 1980
B.Sc. in Mech. Eng. University of Basrah/ Iraq 1976

Administration Experience
Dean College of Eng. Univ. of Babylon (17-5-2003 till 31-12-2005)
Head of Dept. of Mech. Eng. Univ. of Babylon (1993-1999).
Head of Dept. of Mech. Eng. Univ. of Basrah (1990-1992).
Assist. Dean College of Eng. Univ. of Basrah (1987-1988).

Teaching Experience
I gave the following courses for B.Sc. and M.Sc. levels.
1- Internal combustion engines 4th. Year B.Sc. Mech. Eng.
2- Thermodynamics 2nd. Year B.Sc. Mech. Eng.
3- Mathematics 1st . Year B.Sc. Mech. Egg.
4- Pollution control 3rd . Year B.Sc. Chem. Eng.
5- Advanced engineering M.Sc. level.
thermodynamics
6- Thermodynamics of internal M.Sc. level.
combustion engines

Computer Experience
I have a good computer experience in both software and programming . I supervised many graduation projects and M.Sc. dissertations where computer programs are developed to model many engineering problems.

Supervision
1- More than 20 B.Sc. projects in the field of thermodynamics and internal combustion engines.
2- Seventeen M.Sc. dissertations in the fields of internal combustion engines, air pollution , solar energy and thermodynamics.
3- One Ph.D Thesis in the field of internal combustion engines.
4- One Ph.D. Thesis in the field of Hydrogen fuel cells.

Conferences attended
1- Second Basrah Conference for Mechanical Engineering Researches,
Basrah/Iraq, 20-21 April , 1993.
2- Fifth Scientific Conference of Babylon University. 25-27 April, 1999.
3- Scientific Symposium on the Development of Engineering and technical Education in the Beginning of the 21st Century, Hoon, Libya 2002.
4- First Scientific Conference, College of Technology, Najaf, 16-17/3/2008
5- First Scientific Conference of the College of Engineering/ University of Babylon, 17-18/5/2009.
6- Nuclear and Renewable Energy Sources with International Participation, 28-29 Sept 2009, Ankara, Turkey.
7- Second Scientific Conference of the College of Engineering/ University of Babylon, 24-25/3/2010.
8- The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27-29 September 2010, Ammam- Jordan.
9- Third Scientific Conference of the College of Engineering/ University of Babylon, 23-24/3/2011.
10- International Conference on Automotive and Mechanical Engineering April 27-29, 2011, Venice, Italy.
11- International Journal of Arts and Sciences Conference
April 16-19, 2012, Paris, France
12- Third international Scientific Conference, Najaf Technical College, IRAQ
Feb. 20-21, 2013

Scientific Consultations
1- Al-Mussaib power plant, Iraq.
2- Southern Cement Company, Kufa, Iraq.
3- General company for cars manufacturing, Iraq.

University Activities
1- Head of energy committee in Basrah University in Iraq 1987-1990.
2- Head of energy committee in Babylon university in Iraq 1995-1997.
3- Referee for the International Journal of Hydrogen Energy.
4- Member of the scientific committee of the Scientific Symposium on the Development of Engineering and Technical Education in the Beginning of the 21st Century, Hoon ,Libya.
5- Member of the Editorial Board of Babylon University Journal.
6- Chairman of the scientific committee for the 1st annual scientific conference of the College of Engineering, University of Babylon 17-18/5/2009.
7- Chief Editor of the Iraqi Journal for mechanical and Materials Engineering.
8- Member of the scientific committee for the 2nd annual scientific conference of the College of Engineering, University of Babylon 24-25/3/2010.
9- Member of the scientific committee for the 3rd annual scientific conference of the College of Engineering, University of Babylon 23-24/3/2011.
10- Member of the Advisory Committee to The University President.

Published researches
1- An experimental investigation of soot particles size inside
the combustion camber of a diesel engine.
Energy Convers. Mgmt. Journal, Vol. 29, No 2, pp. 141-149, 1989.
2- An experimental study of fuel spray penetration using water
rig modeling technique.
Arabian Journal for Science and Engineering (AJSE), 1990.
3- Radiative heat transfer calculations from soot clouds for
a quiescent combustion chamber diesel engine.
ASME winter annual meeting, Dec. 9-14, 1984.
4- A stochastic simulation model of oil spills fate and transport in the northern region of the Arabian Gulf.
Engineering and Technology Journal, Vol. 12, 1993.
5- Analysis of wind energy potential in Babylon region.
Second Basrah Conference for Mech. Engineering researches.
Basrah, 20-21 April, 1993.
6- A computer modeling of oil spill from Khur Al-Aumaia terminal using circles approach.
Second Basrah Conference for Mech. Engineering researches.
Basrah, 20-21 April, 1993.
7- A theoretical study of free spray penetration.
Engineering and Technology Journal, 1989.
8- A modeling study of soot release in diesel engines.
Engineering and Technology Journal, 1989.
9- A theoretical study of soot cloud emissivity inside the combustion chamber of a diesel engine.
Engineering and Technology Journal, 1988.
10- A new technique to separate hydrocarbon vapors and water
vapor from the recirculated blow off gases in petrol engines.
Military Engineering College Journal, 1995.
11- A diagnostic study of diesel engine faults using noise
measurement technique.
Engineering and Technology Journal, Vol. 12, No. 12, 1993.
12- Soot oxidation in diesel engine.
Engineering and Technology Journal, Vol. 12, No. 10, 1993.
13- Using date stone charcoal as a filtering medium for
automobile exhaust gases.
Energy Convers. Mgmt. Vol. 39, No. 12, pp. 1215-1222, 1998.
14- A prediction study of the effect of hydrogen blending on
the performance and pollutants emission of a four stroke
spark ignition engine.
International Journal of Hydrogen Energy
Vol. 24, Issue 4, 1999, pp. 363-375.
15- Investigation of soot formation and temperature field in
laminar diffusion flames of LPG-air mixture.
Energy Conversion and Management .
Vol. 41, Issue 17, 2000, 1897-1916.
16- An experimental study towards using ceramic materials to
improve wear resistance of a diesel engine exhaust valve.
Fifth Scientific Conference of Babylon University, 25-27 April, 1999.
17- A thermodynamic analysis of non-equilibrium heat transfer in semi-
infinite media subjected to step change in temperature.
Energy Conversion & Management,
Vol. 44, Issue 8, 2003, pp. 1373-1386.
18- A prediction study of a spark-ignition supercharged hydrogen
engine.
Energy Conversion & Management,
Vol. 44, No. 20, pp. 3143-3150, 2003
19- "Optimization Study of Proton Exchange Membrane Fuel Cell Performance"
Turkish Journal of Engineering and Environmental Sciences.
An International Journal
2005; Vol. 29, No.4, pp.235-240.
ISSN: 1300-0160
20- Developing A model to Study the Effect of Operating Pressure
and Temperature on Voltage and Efficiency of Hydrogen Fuel Cell.
The Iraqi Journal For Mech. And Materials Eng.
Vol. 6 , No.1 , 2006.
21- Effect of Operating Conditions On the Performance of Al-Muthanna
Cement Plant Preheaters.
The Iraqi Journal For Mech. And Materials Eng.
Vol. 6 , No.2, 2006.
22- "Mechanical Failure in PEM Fuel Cells due to Cracks and Pin-holes Formation – A CFD Study "
1st Symposium on CFD Tools for Complex Applications.
Libyan Petroleum Institute, National Oil Cooperation, Tripoli,
Libya, December, 8, 2006.
23- "Parametric and Optimization Study of a PEM Fuel Cell Performance Using Three - Dimensional Computational Fluid Dynamics Model"
Renewable Energy Journal. An International Journal.
The Official Journal of WREN. The Institute of Energy, UK
Vol. 32, Number 7,2007, pp.1077-1101
ISSN: 0960-1481
24- "Optimization Study of a PEM Fuel Cell Performance Using 3D Multi - Phase Computational Fluid Dynamics Model"
Journal of Zhejiang University SCIENCE A.
International Applied Physics & Engineering Journal
Vol. 8, Number 2, 2007, pp.285-300
ISSN: 1009-3095
25- "Influence of the Design Parameters in a Proton Exchange Membrane (PEM) Fuel Cell on the Mechanical Behaviour of the Polymer Membrane"
Energy & Fuels.
An American Chemical Society Journal, USA
Vol. 21, Number 4, 2007, pp.2258-2267
ISSN: 0887-0624
26- "Modeling Optimizes PEM Fuel Cell Performance Using Three-Dimensional Multi - Phase Computational Fluid Dynamics Model".
Energy Conversion & Management.
An International Journal
Vol. 48, Issue 12, 2007, pp 3102-3119.
ISSN: 0196-8904
27- "Effect of Operating Parameters on The Hygro-Thermal Stresses in Proton Exchange Membranes of Fuel Cells".
International Journal of Hydrogen Energy.
Official J. of the Int. Association for Hydrogen Energy, USA
Vol. 32, Issue 7, 2007, pp. 4510-4522
ISSN: 0360-3199
28- "Effect of Design Parameters on the Hygro-Thermal Stresses in Proton Exchange Membranes of the Fuel Cells"
Engineering Applications of Computational Fluid Mechanics.
An International Journal
Vol. 1 Number 2, 2007, pp. 71-87
ISSN: 1994-2060
29- "Prediction of Hygro-Thermal Stresses Distribution in Proton Exchange Membranes Using Three-Dimensional Multi-Phase Computational Fluid Dynamics Model"
Journal of Power and Energy.
Proc. of the Institution of Mechanical Engineers, UK
Vol. 221, Number 7, 2007.
ISSN: 0957-6509
30- "Optimum Operating Point of PEM Fuel Cells to Extract Peak Energy from Our Fuels"
Fuel Cell Magazine.
An International Magazine
Vol. 8, 2007.
ISSN: 1539-1647
31- "Numerical Analysis of a Proton Exchange Membrane Fuel Cell: Part I. Model Development"
Journal of Power and Energy.
Proc. of the Institution of Mechanical Engineers, UK
Vol. 221, Number 7, 2007
ISSN: 0957-6509
32- "Numerical Analysis of a Proton Exchange Membrane Fuel Cell: Part II. Parametric Study"
Journal of Power and Energy.
Proc. of the Institution of Mechanical Engineers, UK
Vol. 221, Number 7, 2007.
ISSN: 0957-6509
33-"Behavior of the Proton Exchange Membranes in Fuel Cells Due to Hygro-Thermal Stresses"
Fuel Cell Magazine.
An International Magazine
Vol. 1, 2007
ISSN: 1539-1647

34- "Three - Dimensional, Multi - Phase Flow, Computational Fluid Dynamics Model for Analysis of Transport Phenomena and Thermal Stresses in PEM Fuel Cells"
The Third International Conference on Thermal Engineering: Theory and Applications.
(Ryerson University, Canada & Hashemite University, Jordan), Amman, Jordan, May 21-23, 2007.
35- "Efficiency and Economics of Proton Exchange Membrane Fuel Cells – A CFD Study"
Environmental Impact of Energy and Water Saving.
First International Conference and Exhibition.
International Energy Foundation, Tripoli, Libya,
May 30-31, 2007. PP. 179-191.
36- "Modeling Optimizes PEM Fuel Cells to Extract Peak Energy From Our Fuels – A CFD Study"
International Conference on New Trends in Petroleum Refining.
Ministry of Education and Research, Ovidius University of Constanta, Constanta, Romania, December 6-8, 2007.
37- "CFD Model for Analysis and Design of PEM Fuel Cells"
The Sixth Jordanian International Mechanical Engineering Conference (JIMEC’6).
Philadelphia University & Jordan Engineers Association, Amman – Jordan, October 22 – 24, 2007.
38- A Three Dimensional Computational Fluid Dynamics Model for Analysis of Transport Phenomena and Electrochemical Reactions in PEM Fuel Cells.
The Iraqi Journal For Mech. And Materials Eng.
Vol. 7, No.3 2007, pp. 159-176.
39- A Quasi- Dimensional Model to Study The Effect of Hydrogen Blending on The Pollutants Emission of a Medium Speed Diesel Engine.
1st Scientific Conf. Tech. College Najaf, PP 1-16, 16-17/3/2008.
40- Ethanol as a Lead/MTBE Replacement For Spark Iignition Engines in Libya.
Ovidius University Annals Of Chemistry Journal,
Vol. 18- No. 1- pp. 22-30, 2007.
41- Modeling Optimizes PEM Fuel Cells to Extract Peak Energy From Our Fuels- a CFD Study.
Ovidius University Annals Of Chemistry Journal,
Vol. 18, No.1, pp. 31-36 , 2007.
42- Ethanol As An Octane Enhancer For The Commercial Gasoline Fuels.
The Iraqi Journal For Mech. And Materials Eng.
Vol.8, No.2, pp.96-109, 2008.
43- Production and Testing of Bio-diesel from Waste Cooking Oil.
5th International Conference on “Combustion, Incineration/Pyrolysis and
Emission Control (i-CIPEC 2008)”
16-19 December 2008, Chiang Mai, Thailand
44- One dimensional model for water management through the membrane of a
hydrogen PEM fuel cell.
The Iraqi Journal For Mech. And Materials Eng.
Vol.8, No.3, pp.237-248, 2008.
45- A numerical investigation of the effect of hydrogen blending on the temperature field and pollutants emission of a four stroke spark ignition engine.
The Iraqi Journal For Mech. And Materials Eng.
Special issue for the 1st Scientific Conference of the College of Engineering/ University of Babylon, No. C, PP. 465-483, 2009.
46- Experimental investigation of using hydrogen blending to improve performance
and to reduce pollutants emission of a spark ignition engine.
Nuclear and renewable energy resources conference with international participation. 28-29 Sept. 2009, ANKARA, TYRKEY.
47-Experimental and Numerical Study of Fin Heat Sinks Systems.
The Iraqi Journal For Mechanical And Materials Engineering,
Vol.9, No.3, 2009.
48- A Modeling Study of The Effect of Hydrogen Addition on The Performance of A Medium Speed Four Stroke Diesel Engine.
The Iraqi Journal For Mechanical And Materials Engineering,
Vol.9, No.3, 2009.
59- The Effect of Spark Plug Location On Cylinder Pressure, Temperature Field And Pollutants Concentration.
The Iraqi Journal For Mechanical And Materials Engineering, Vol.9, No.3, 2009.
50- Effect of operating conditions on the performance and emissions of a diesel engine operated with hydrogen blended fuel.
The 2nd. Scientific Conference of the College of Engineering/ Babylon University, Babylon, 24-25/3/2010.
51- Experimental Investigation of The Effect of Hydrogen Blending on The
Concentration of Pollutants Emitted From a Four Stroke Diesel Engine.
The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27-29 September 2010, Ammam- Jordan.
52- 5th International conference on “Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC 2008)” 16-19 Dec. 2008, Chiang Mai, Thailand.
53- Experimental Investigation of the Effect of Hydrogen Blending on the Concentration of Pollutants Emitted From a Four Stroke Diesel Engine
Jordan Journal of Mechanical and Industrial Engineering,
Volume 5, Number1, February 2011
54- Experimental Investigation Of The Effect Of Hydrogen Manifold Injection On The Performance Of A Compression Ignition Engine
International Conference on Automotive and Mechanical Engineering,
Venice, Italy during April 27-29, 2011.
55- Design, Construction and Testing of a Solar Air Heater in Iraq
International Journal of Arts and Sciences Conference
April 16-19, 2012, Paris, France
56- Design, Construction and Testing of a Solar Air Heater in Iraq
Academic Journal of Science,
CD-ROM. ISSN: 2165-6282 :: 1(3):323–332 (2012)
Copyright c 2012 by UniversityPublications.ne
57- Quazi Three Dimensional Analysis of Temperature Field Inside the Flow Duct of Air Solar Heater.
Third International Scientific Conference, Najaf Technical College, 20-21/2/2013
58- Analysis of Recorded Metrological Data in Babylon Province of IRAQ During 2011
Iraqi Journal for Mechanical and Materials Engineering, Vol 14, No. 2, 2014
59- A Numerical Investigation of the Effect of Hydrogen Blended on the Temperature Field and Performance of a Spark Ignition Engine
International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME) Volume 2, Issue 1 (2014) ISSN 2320–4060 (Online)

الكتب المؤلفة والمترجمة
1- مدخل الى محركات الاحتراق الداخلي للمؤلف Richard Stone (مترجم).
2 -ديناميك الحرارة بين النظرية والتطبيق (مؤلف) طبع على النفقة الخاصة للمؤلف
3- Hydrogen-Diesel Blending in Compression Ignition Engines (مؤلف)
طبع من قبل دار النشر الالمانية LAMBERT Academic Publishing
4- Thermodynamics Through solved problems طبع على نفقة المؤلف

الأستاذ الدكتور هارون عبد الكاظم شهد الجنابي


Dr. Haroun A.K. Shahad

المشاركات في المجتمع الاكاديمي

I participated in many national and international conferences as keynote speaker specially those arranged at Babylon University as indicated in my CV

معلومات اخرى

I am the chief editor of the Iraqi Journal for Mechanical and Materials Engineering ,and a member of the editorial board of Babylon University Journal.