د. سلام هادي حسين الطائي

السيرة المهنية

عملت تدريسي في قسم الهندسة الميكانيكية من 2002 لغاية 2014 قمت بتدريس مادتي التكييف والتثليج لطلاب المرحلة الرابعة للقسم وكذلك مادة التحليلات العددية والهندسية لطلاب المرحلة الثالثة ثم انتقلت الى كلية الهندسة/ المسيب منتصف عام 2014 وتكلفت برئاسة قسم هندسة السيارات من بداية انتقالي الى الكلية ولغاية الان كما قمت بتدريس مادة الرياضيات لطلاب المرحلة الاولى لقسمي هندسة السيارات والطاقة وكذلك مادة الثرمودايميك لطلاب المرحلة الثانية والتحليلات الهندسية والعددية وللقسمين ايضا ومادة التكييف والتثليج للمرحلة الرابعة في قسم هندسة السيارات.

الاستاذ المساعد الدكتور المهندس سلام هادي حسين الطائي
اسم العائلة حسين
الاسم الكامل سلام هادي حسين
تاريخ الميلاد 4/9/1974
الجنس ذكر
رقم جواز السفر G1701015
القومية عربية
الجنسية عراقي
الحالة الزوجية متزوج + 4 اطفال
رقم الهاتف المنزلي 030580035
رقم الموبايل 7802431066-964
البريد الالكتروني salamphd1974@yahoo.com
البريد الالكتروني الرسمي met.salam.hadi@uobabylon.edu.iq

الشهادات الجامعية الاختصاص الدقيق سنة التخرج
البكالوريوس هندسة ميكانيكية-ميكانيك عام 1996-1997
الماجستير هندسة ميكانيكية-تكييف وتثليج 1997-2000
الدكتوراه هندسة ميكانيكية-موائع 2000-2005

المهام الوظيفية الفترة الوظيفة
1. 24/8/2002 -2/4/2002 مدرس مساعد في قسم الهندسة الميكانيكية / كلية الهندسة/ جامعة بابل
2. 24/8/2005 -2/9/2012 مدرس في قسم الهندسة الميكانيكية / كلية الهندسة/ جامعة بابل
3. 2/9/2012 -14/7/2014 استاذ مساعد في قسم الهندسة الميكانيكية / كلية الهندسة/ جامعة بابل
4. 14/7/2014 -2/8/2014 استاذ مساعد في قسم هندسة السيارات / كلية الهندسة-المسيب / جامعة بابل
5. 2/8/2014 -2/1/2017 رئيس قسم هندسة السيارات / كلية الهندسة-المسيب / جامعة بابل
6. 2/1/2017 –حتى الان استاذ مساعد في قسم هندسة السيارات / كلية الهندسة-المسيب / جامعة بابل

التدريسات المادة الدراسية المرحلة الدراسية الموقع
1 مقاومة مواد الثانية- اولية قسم الهندسة الكهروميكانيكية – الجامعة التكنولوجية
2 تكييف وتثليج الرابعة - اولية قسم الهندسة الميكانيكية / كلية الهندسة/ جامعة بابل
3 رياضيات الاولى- اولية قسم هندسة السيارات / كلية الهندسة-المسيب / جامعة بابل
4 ديناميك حرارة الثانية- اولية قسم هندسة السيارات / كلية الهندسة-المسيب / جامعة بابل
5 قياسات ماجستير- عليا قسم الهندسة الميكانيكية / كلية الهندسة/ جامعة بابل

ت المجالات البحثية
1 التوصيل الحراري الشبه المستقر
2 انظمة التكييف والتثليج
3 الحمل الحراري الحر والقسري والمشترك
4 جريان الموائع وانتقال الحرارة داخل الاوساط المسامية
5 الموائع النانوية في الجريانين الاحادي والثنائي اطور
6 التوصيل المزدوج بين الصلب والمائع
7 الانتروبي والمجالات الكهرومغناطيسية وتطبيقاتها
8 خطوط الحرارة وتطبيقاتها
9 هندسة التزييت وتطبيقاتها
10 الجريان المتعدد الطبقات وتطبيقاتها
11 حل مجموعة من المعادلات التفاضلية المرتبطة

ت التقييمات العلمية في المجلات المحلية
1 المجلة العراقية لمهندسي الميكانيك والمواد- جامعة بابل
2 المجلة العلمية لجامعة كربلاء
3 المجلة العلمية لجامعة بابل
4 المجلة العلمية الهندسية لجامعة الكوفة
5 المجلة العلمية الهندسية لجامعة القادسية
6 المجلة العلمية الهندسية للجامعة التكنولوجية
7 المجلة العلمية الهندسية لجامعة تكريت
8 المجلة العلمية الهندسية لجامعة الموصل
9 المجلة العلمية الهندسية لجامعة البصرة
10 المجلة العلمية الهندسية لجامعة ديالى

ت التقييمات العلمية الدولية خارج العراق دار النشر / البلد
1 المجلة الدولية لانتقال الحرارة العددي – الجزء A تايلور و فرانسيس/ امريكا
2 المجلة الدولية للاتصالات في انتقال الحرارة والكتلة السفير/ امريكا
3 المجلة الدولية لانتقال الحرارة-ASME ASME/ امريكا
4 المجلة الدولية لانتقال الحرارة سبرنكر / امريكا
5 المجلة الدولية للحاسوب والموائع السفير/ امريكا
6 المجلة الدولية للعلوم الحرارية السفير/ امريكا
7 المجلة الدولية للحاسوب والرياضيات وتطبيقاتها السفير/ امريكا
8 المجلة الدولية في الموائع العددية اندرسينس / امريكا
9 المجلة الدولية لتحسين انتقال الحرارة بيت بيجيل/ امريكا
10 المجلة الدولية للهندسة الميكانيكية والمواد اي جي ام ام / ماليزيا
ت التكريمات والجوائز
1 جائزة وزارة التعليم العالي والبحث العلمي لتشر البحوث خارج العرق 2011
2 جائزة وزارة التعليم العالي والبحث العلمي لتشر البحوث خارج العرق 2012
3 جائزة وزارة التعليم العالي والبحث العلمي لتشر البحوث خارج العرق 2013
4 جائزة وزارة التعليم العالي والبحث العلمي لتشر البحوث خارج العرق 2014
5 جائزة وزارة التعليم العالي والبحث العلمي لافضل رسالة ماجستير 2000

ت عضوية الجمعيات العلمية المحلية والدولية
1 عضو في نقابة المهندسين العراقية
2 عضو في الجمعية الامريكية لمهندسي التكييف والتثليج (ASHRAE)


البحوث العلمية المحلية
1. Salam Hadi Hussain, Mohsen Gawy Hamza, Numerical Prediction of Natural Convection Phenomena Through a Square Enclosure with a Heated Circular Cylinder at Different Horizontal Locations. Journal of University of Babylon, Vol. 20, No. 4, page:1033-1050, 2012, Iraq.

2. Salam Hadi Hussain, Numerical Analysis of Mixed Convective Flow Through a Lid-Driven Inclined Rectangular Cavity Filled with Mercury. Journal of University of Babylon, Vol. 18, No. 2, page:332-346, 2010, Iraq.

3. Talib Kshash Murtadha and Salam Hadi Hussain, Domestic Refrigerator Energy Testing With Alternative Refrigerants. Journal of Karbala Vol. 6, No. 2, Scientific, 2008, pp. 111-116, Iraq.

4. Salam Hadi Hussain, Studying The Internal Heat Transfer by Natural Convection Through an Inclined and a Modified Square Enclosure with a Triangular Top Wall. Journal of Engineering, Kufa University Volume 1, page: 101-118, 2010, Iraq.

5. Salam Hadi Hussain, Ahmed Kadhim Hussein, Numerical Simulation of Buoyancy-Driven Laminar Flow Through an Air –Filled Isosceles Triangular Enclosure with a Differentially Heated Side Walls and an Adiabatic Bottom Wall. Engineering and Technology Journal, Vol. 28, No. 10, pp: 2054-2069, University of Technology, 2010,
6. Salam Hadi Hussain, Natural Convection Heat Transfer Enhancement in a Differentially Heated parallelogrammic Enclosure Filled with Cooper-Water Nanofluid, Journal of University of Babylon, Vol. 18, No. 2, page:211-227, 2013, Iraq.

7. Salam Hadi Hussain, Magneto-hydrodynamics Opposing Mixed Convection in a Differentially Heated Two-Sided Lid-Driven Parallelogrammic Cavity, Journal of University of Babylon, Vol. 21, No. 4, page:1223-1242, 2013, Iraq.

البحوث العلمية الدولية خارج العراق
8.Salam Hadi Hussain, Mohammed Yousif Jabbar, Ahmad Saddy Mohamad, Influence of presence of inclined centered baffle and corrugation frequency on natural convection heat transfer flow of air inside a square enclosure with corrugated side walls. International Journal of Thermal Sciences 50 (2011) 1799-1808

9.Talib Kshash Murtadha and Salam Hadi Hussain, Performance Simulation of Single-Evaporator Domestic Refrigerator Using Alternative Refrigerants. Engineering Journal of The University of Qatar, Vol. 16, 2003, Page.109-124.Qatar.

10.Ahmed Kadhim Hussein and Salam Hadi Hussain, Numerical Analysis of Steady Natural Convection of Water in Inclined Square Enclosure with Internal Heat Generation, International Conference on Mechanical and Electrical Technology (ICMET 2010), Singapore.

11.Ali J. Chamkha, Salam Hadi Hussain and Qusay Rashid Abd-Amer, Mixed Convection Heat Transfer of Air inside a Square Vented Cavity with a Heated Horizontal Square Cylinder, Numerical Heat Transfer, Part A, 59: 58–79, 2011.

12.Salam Hadi Hussain, Combined Convection Flow Through Inclined Rectangular Enclosure with a Sliding Wavy Hot Top Surface. International Journal of Mechanical and Materials Engineering (IJMME), Vol.5 (2010), No.2, 142-151.

13.A.K. Hussein and S. H. Hussain, Mixed Convection Through a Lid-Driven Air– Filled Square Cavity With a Hot Wavy Wall, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No.2, 222-235.

14.Salam Hadi Hussain, Ahmed Kadhim Hussein, Rehab Noor Mohammed, Studying the effects of a longitudinal magnetic field and discrete isoflux heat source size on natural convection inside a tilted sinusoidal corrugated enclosure, Computers and Mathematics with Applications 64 (2012) 476–488.

15.Salam Hadi Hussain and Ahmed Kadhim Hussein, Natural Convection Heat Transfer in a Differentially Heated Square Enclosure with a Heat Generating-Conducting Circular Cylinder at Different Diagonal Locations, 6th International Advanced Technologies Symposium (IATS’11), 16-18 May 2011, Elaz??, Turkey.

16.Ahmed Kadhim Hussein and Salam Hadi Hussain, Natural Convection In a Modified Square Enclosure With an Inclined Triangular Top Wall Subjected To Uniform Heat Flux In Its Left Vertical Wavy Side Wall, The Asian Symposium on Computational Heat Transfer and Fluid Flow - 2011, 22?26 September 2011, Kyoto, JAPAN.
17.Salam Hadi Hussain, Ahmed Kadhim Hussein, Mixed convection heat transfer in a differentially heated square enclosure with a conductive rotating circular cylinder at different vertical locations. International Communications in Heat and Mass Transfer

38 (2011) 263–274.
18. Salam Hadi Hussain, Ahmed Kadhim Hussein, Numerical investigation of natural convection phenomena in a uniformly heated circular cylinder immersed in square enclosure filled with air at different vertical locations. International Communications in Heat and Mass Transfer 37 (2010) 1115–1126.

19.Salam Hadi Hussain and Rehab Noor Mohammed, Effects of out of Phase And Inclination Angles on Natural Convection Heat Transfer Flow of Air Inside a Sinusoidal Corrugated Enclosure with Spatially Variable Wall Temperature. Journal of Enhanced Heat Transfer, 18 (5): 403–417 (2011).
20.Salam Hadi Hussain And Qusay Rashid Abd-Amer, Mixed Convection Heat Transfer Flowof Air Inside A Sinusoidal Corrugated Cavity With A Heat-Conducting Horizontal Circular Cylinder, Journal of Enhanced Heat Transfer, 18 (5): 433–447 (2011).

21.Salam Hadi Hussain , Ahmed Kadhim Hussein , Mahmoud Moustafa Mahdi, Natural convection in a square inclined enclosure with vee-corrugated sidewalls subjected to constant flux heating from below, Nonlinear Analysis: Modelling and Control, 2011. Vol. 16, No. 2, 152–169.

22.Sumon Saha, Ahmed Kadhim Hussein, Goutam Saha and Salam Hadi Hussain, Mixed Convection in a Tilted Lid-Driven Square Enclosure with Adiabatic Cylinder at the Center. Int. J. of Heat and Technology, Vol.29, No.1,143-156 Italy, 2011.
23.Ahmed Kadhim Hussein and Salam Hadi Hussain, Natural Convection in a Square Enclosure Filled With a Saturated Porous Matrix Under Different Discrete Heat Sources Locations, World Academy of Science, Engineering and Technology,78, 1896-1902, 2013.
24.Salam Hadi Hussain and Ahmed Kadhim Hussein, Natural Convection Analysis around a Hot Solid Circular Cylinder Embedded Inside an Octagonal Enclosure at Various Orientation Locations, World Academy of Science, Engineering and Technology, 78, 1238-1243, 2013.
25.Salam Hadi Hussain, Riyadh Sabah and Farooq Hassan Ali, Numerical study of natural convection heat transfer of air flow inside a corrugated enclosure in the presence of an inclined heated plate. Progress in Computational Fluid Dynamics, Vol. 13, No. 1, 34-43, 2013.
26.Salam Hadi Hussain, Ahmed Kadhim Hussein, and Kareema Abdul Kadim, Numerical Simulation of Natural Convection in a Parallelogrammic Enclosure Containing Volumetric Heat Source with Non-uniformly Heated Left Sidewall, Heat Transfer—Asian Research, Published online in Wiley Online Library (wileyonlinelibrary.com/journal/htj). DOI 10.1002/htj.21096, 2013.
27.Ali J. Chamkha, Salam Hadi Hussain, Farooq Hassan Ali and Ahmed Ali Shaker, Conduction-combined forced and natural convection in a lid-driven parallelogram-shaped enclosure divided by a solid partition, Progress in Computational Fluid Dynamics, Vol. 12, No. 5, 309-321, 2012.

28. Salam H. Hussain, Ahmed K. Hussein, H. H. Al-Kayiem and Hakan F. Oztop, Numerical Computation of Buoyancy Flow and Heat Transfer in Various Aspect Ratios Cavities Filled with Water. 15th International Conference on Applied Mechanics and Mechanical Engineering (AMME-15), Military Technical College, May 29-31, 2012, Egypt.

29.Salam H. Hussain, Ahmed K. Hussein, Natural Convection Heat Transfer Enhancement in a Differentially Heated Parallelogrammic Enclosure Filled with Copper-Water Nanofluid, ASME, Journal of Heat Transfer, August 2014, Vol. 136.
30.Hussain H. Al-Kayiem, Ahmed K. Hussein, Jalal M. Jaleel and Salam H. Hussain, Numerical Computation of 3-Dimensional Supersonic Flow Field over Seamless Missiles, Indian Journal of Science and Technology, Vol 7(10), 1563–1572, October 2014.
31. Salam Hadi Hussain, Ahmed Kadhim Hussein, and Kareema Abdul Kadim; Numerical Simulation of Natural Convection in a Parallelogrammic Enclosure Containing Volumetric Heat Source with Non-uniformly Heated Left Sidewall. Journal of heat Transfer Asian-Research, Vol.43, No.6, pp:542-560, 2014
32. Salam H. Hussain, Ahmed K. Hussein, Characteristics of Magnetohydrodynamic Mixed Convection In A Parallel Motion Two-Sided Lid- Driven Differentially Heated Parallelogrammic Cavity With Various Skew Angles, Journal of Thermal Engineering, Yildiz Technical University Press, Istanbul, Turkey Vol. 1, No. 3, pp. 221-235, July, 2015.
33. A. I. Alsabery, A. J. Chamkha , S. H. Hussain, H. Saleh, I. Hashim; Heatline Visualization of Natural Convection In a Trapezoidal Cavity Partly Filled With Nanofluid Porous Layer and Partly With Non-Newtonian Fluid Layer. Advanced Powder Technology, Vol. 26,1230-1244, 2015.

34. Salam H. Hussain, Ahmed Abbas Shahath; Effect of Salt Addition on the Drag Reduction by Cationic Surfactant, The Iraqi Journal For Mechanical and Materials Engineering , July, 2015.
35. Salam H. Hussain, Ahmed Abbas Shahath; Effect of Polymer Type And Mixing of Polymers on Drag Reduction In Turbulent Pipe Flow, Journal of Babylon University , Vol.24, No.1, 2015.
36. Salam H. Hussain, Ahmed K. Hussein, Heatline visualization of natural convection heat transfer in an inclined wavy cavities filled with nanofluids and subjected to a discrete isoflux heating from its left sidewall, Alexandria Engineering Journal (2016) 55,169-186.
37. 35H. 37. Salam H. Hussain; Analysis of heatlines and entropy generation during double-diffusive MHD natural convection within a tilted sinusoidal corrugated porous enclosure, Engineering Science and Technology, Engineering Science and Technology an International Journal, (2016)19,926-945.
38. A. I. Alsabery, H. Saleh, I. Hashim; and S. H. Hussain, Darcian Natural Convection in Inclined Square Cavity Partially Filled Between the Central Square Hole Filled with a Fluid and Inside a Square Porous Cavity Filled with Nanofluid, Journal of Applied Fluid Mechanics , Vol. 9, No. 4, pp. 1763-1775, 2016.
39. Ahmed Kadhim Hussein, Salam Hadi Hussain, Sumon Saha, Goutam Saha and M. Hasanuzzaman, Effects of a Longitudinal Magnetic Field and Discrete Isoflux Heat Source Size on Natural Convection inside a Tilted Sinusoidal Corrugated Enclosure, J. Basic. Appl. Sci. Res., 3(10) 402-415, 2013
40. Ammar I. Alsabery, Salam H. Hussain, Habibis Saleh and Ishak Hashim, Inclination Angle Effect on Natural Convection in a Square Cavity Partially Filled with Non-Newtonian Fluids Layer, AIP Conference Proceedings 1678, 060007 (2015); doi: 10.1063/1.4931334.
41. Salam Hadi Hussain, Numerical Investigation Of The Enhanced Heat Transfer Due To urvature–Induced Lateral Vortices In Laminar Flows Over Sinusoidal Corrugated-Plate Channels, Al-Qadisiya Journal For Engineering Sciences, Vol. 2, No. 2, 2009

Curriculum Vitae

Assistant Professor Dr. Eng. Salam Hadi Hussain
Family name Hussain
Full name Salam Hadi Hussain
Date of birth 15-09-1974
Sex, Passport Male, G1701015
number

Profession Assistant Professor
Country Iraq
Nationality Iraqi
Status Married- Three children
Telephone 964-7802431066
E-mail salamphd1974@yahoo.com

From September 2012 till Assistant Professor at Department of
Mechanical Engineering /College of
now Engineering/ University of Babylon,
Babylon , Iraq

From August 2005 to Lecturer at Department of Mechanical
1.Occupations Engineering /College of Engineering/
September 2011
University of Babylon, Babylon , Iraq
From April 1999 to August Assistant Lecturer at Department of
Mechanical Engineering /College of
2005 Engineering/ University of Babylon,
Babylon, Iraq.

Ph.D. in Mechanical Engineering
2005 from University of Baghdad
/Mechanical Engineering

Department/ Iraq,
M.Sc. in Mechanical Engineering
2. Academic Degrees 2000 from University of Technology
/Mechanical Engineering

Department/ Baghdad / Iraq
B.Sc. in Mechanical Engineering
1997 from University of Technology
/Mechanical Engineering

Department/ Baghdad / Iraq
3. Correspondence Department of Automobile Engineering /College of Engineering –Al Musayab / University of Babylon, Babylon , Iraq
Education Address

4. Languages 1. Arabic: speak, read, write and understand.
2. English: speak, read, write and understand.

1. Gas dynamics
5. Teaching 2. Air-conditioning and Refrigeration
3. Strength of Materials



4. Numerical and Engineering Analyses
5. Engineering Mathematics I & II
6. Engineering Thermodynamics I & II

1. Non-Equilibrium Conduction Heat transfer.
2. Air- Conditioning and Refrigeration Systems
6.Research Areas of 3. Convection Heat Transfer.
4. Entropy Generation.
Interest
5. Double-Diffusive Magnetoconvection.

6. Porous and Nanofluids Systems.
7. Conjugate Heat Transfer.
7. Membership in Member in The American Society of Heating, Refrigeration
Professional
and Air-Conditioning Engineers (ASHRAE)
Societies

1-Scientific Refereeof The Iraqi Journal for Mechanical and
Materials Engineering.
8. Reviewed many 2-Scientific Referee of The Scientific Kerbala Journal.
3-Scientific Referee of The Babylon University Journal.
papers for many
4-Scientific Referee of The Journal of Al -Qadisiya for Engineering
journals inside IRAQ
Sciences.

5-Scientific Referee of Engineering Kufa Journal.
6. Scientific Referee of Engineering and Technology Journal.
1. International Journal of Mechanical and Materials
Engineering (IJMME).
2. Numerical Heat Transfer, Part A.
3. International Communications in Heat and Mass Transfer.
9. Reviewed many 4. International Journal of Heat and Mass Transfer.
5. Journal of Enhanced Heat Transfer.
papers for many
6. ASME, Journal of Heat Transfer.
journals outside IRAQ
7. SPRINGER, Journal of Heat Transfer.

8. International Journal of Computer and fluids
9. Nonlinear Analysis: Modelling and Control

10. International Journal of Thermal Sciences

11. Computers and Mathematics with Applications

10. National Publications Papers


1. Salam Hadi Hussain, Mohsen Gawy Hamza, Numerical Prediction of Natural Convection Phenomena Through a Square Enclosure with a Heated Circular Cylinder at Different Horizontal Locations. Journal of University of Babylon, Vol. 20, No. 4, page:1033-1050, 2012, Iraq.

2. Salam Hadi Hussain, Numerical Analysis of Mixed Convective Flow Through a Lid-Driven Inclined Rectangular Cavity Filled with Mercury. Journal of University of Babylon, Vol. 18, No. 2, page:332-346, 2010, Iraq.

3.Talib Kshash Murtadha and Salam Hadi Hussain, Domestic Refrigerator Energy Testing With Alternative Refrigerants. Journal of Karbala Vol. 6, No. 2, Scientific, 2008, pp. 111-116, Iraq.

4.Salam Hadi Hussain, Studying The Internal Heat Transfer by Natural Convection Through an Inclined and a Modified Square Enclosure with a Triangular Top Wall. Journal of Engineering, Kufa University Volume 1, page: 101-118, 2010, Iraq.

5.Salam Hadi Hussain, Ahmed Kadhim Hussein, Numerical Simulation of Buoyancy-Driven Laminar Flow Through an Air –Filled Isosceles Triangular Enclosure with a Differentially Heated Side Walls and an Adiabatic Bottom Wall. Engineering and Technology Journal, Vol. 28, No. 10, pp: 2054-2069, University of Technology, 2010,
6.Salam Hadi Hussain, Natural Convection Heat Transfer Enhancement in a Differentially Heated parallelogrammic Enclosure Filled with Cooper-Water Nanofluid, Journal of University of Babylon, Vol. 18, No. 2, page:211-227, 2013, Iraq.

7. Salam Hadi Hussain, Magneto-hydrodynamics Opposing Mixed Convection in a Differentially Heated Two-Sided Lid-Driven Parallelogrammic Cavity, Journal of University of Babylon, Vol. 21, No. 4, page:1223-1242, 2013, Iraq.
11. International Publications Papers
8.Salam Hadi Hussain, Mohammed Yousif Jabbar, Ahmad Saddy Mohamad, Influence of presence of inclined centered baffle and corrugation frequency on natural convection heat transfer flow of air inside a square enclosure with corrugated side walls. International Journal of Thermal Sciences 50 (2011) 1799-1808

9.Talib Kshash Murtadha and Salam Hadi Hussain, Performance Simulation of Single-Evaporator Domestic Refrigerator Using Alternative Refrigerants. Engineering Journal of The University of Qatar, Vol. 16, 2003, Page.109-124.Qatar.

10.Ahmed Kadhim Hussein and Salam Hadi Hussain, Numerical Analysis of Steady Natural Convection of Water in Inclined Square Enclosure with Internal Heat Generation, International Conference on Mechanical and Electrical Technology (ICMET 2010), Singapore.

11.Ali J. Chamkha, Salam Hadi Hussain and Qusay Rashid Abd-Amer, Mixed Convection Heat Transfer of Air inside a Square Vented Cavity with a Heated Horizontal Square Cylinder, Numerical Heat Transfer, Part A, 59: 58–79, 2011.

12.Salam Hadi Hussain, Combined Convection Flow Through Inclined Rectangular Enclosure with a Sliding Wavy Hot Top Surface. International Journal of Mechanical and Materials Engineering (IJMME), Vol.5 (2010), No.2, 142-151.

13.A.K. Hussein and S. H. Hussain, Mixed Convection Through a Lid-Driven Air– Filled Square Cavity With a Hot Wavy Wall, International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No.2, 222-235.

14.Salam Hadi Hussain, Ahmed Kadhim Hussein, Rehab Noor Mohammed, Studying the effects of a longitudinal magnetic field and discrete isoflux heat source size on natural convection inside a tilted sinusoidal corrugated enclosure, Computers and Mathematics with Applications 64 (2012) 476–488.

15.Salam Hadi Hussain and Ahmed Kadhim Hussein, Natural Convection Heat Transfer in a Differentially Heated Square Enclosure with a Heat Generating-Conducting Circular Cylinder at Different Diagonal Locations, 6th International Advanced Technologies Symposium (IATS’11), 16-18 May 2011, Elaz??, Turkey.

16.Ahmed Kadhim Hussein and Salam Hadi Hussain, Natural Convection In a Modified Square Enclosure With an Inclined Triangular Top Wall Subjected To Uniform Heat Flux In Its Left Vertical Wavy Side Wall, The Asian Symposium on Computational Heat Transfer and Fluid Flow - 2011, 22?26 September 2011, Kyoto, JAPAN.
17.Salam Hadi Hussain, Ahmed Kadhim Hussein, Mixed convection heat transfer in a differentially heated square enclosure with a conductive rotating circular cylinder at different vertical locations. International Communications in Heat and Mass Transfer

38 (2011) 263–274.
18. Salam Hadi Hussain, Ahmed Kadhim Hussein, Numerical investigation of natural convection phenomena in a uniformly heated circular cylinder immersed in square enclosure filled with air at different vertical locations. International Communications in Heat and Mass Transfer 37 (2010) 1115–1126.

19.Salam Hadi Hussain and Rehab Noor Mohammed, Effects of out of Phase And Inclination Angles on Natural Convection Heat Transfer Flow of Air Inside a Sinusoidal Corrugated Enclosure with Spatially Variable Wall Temperature. Journal of Enhanced Heat Transfer, 18 (5): 403–417 (2011).
20.Salam Hadi Hussain And Qusay Rashid Abd-Amer, Mixed Convection Heat Transfer Flowof Air Inside A Sinusoidal Corrugated Cavity With A Heat-Conducting Horizontal Circular Cylinder, Journal of Enhanced Heat Transfer, 18 (5): 433–447 (2011).

21.Salam Hadi Hussain , Ahmed Kadhim Hussein , Mahmoud Moustafa Mahdi, Natural convection in a square inclined enclosure with vee-corrugated sidewalls subjected to constant flux heating from below, Nonlinear Analysis: Modelling and Control, 2011. Vol. 16, No. 2, 152–169.

22.Sumon Saha, Ahmed Kadhim Hussein, Goutam Saha and Salam Hadi Hussain, Mixed Convection in a Tilted Lid-Driven Square Enclosure with Adiabatic Cylinder at the Center. Int. J. of Heat and Technology, Vol.29, No.1,143-156 Italy, 2011.
23.Ahmed Kadhim Hussein and Salam Hadi Hussain, Natural Convection in a Square Enclosure Filled With a Saturated Porous Matrix Under Different Discrete Heat Sources Locations, World Academy of Science, Engineering and Technology,78, 1896-1902, 2013.
24.Salam Hadi Hussain and Ahmed Kadhim Hussein, Natural Convection Analysis around a Hot Solid Circular Cylinder Embedded Inside an Octagonal Enclosure at Various Orientation Locations, World Academy of Science, Engineering and Technology, 78, 1238-1243, 2013.
25.Salam Hadi Hussain, Riyadh Sabah and Farooq Hassan Ali, Numerical study of natural convection heat transfer of air flow inside a corrugated enclosure in the presence of an inclined heated plate. Progress in Computational Fluid Dynamics, Vol. 13, No. 1, 34-43, 2013.
26.Salam Hadi Hussain, Ahmed Kadhim Hussein, and Kareema Abdul Kadim, Numerical Simulation of Natural Convection in a Parallelogrammic Enclosure Containing Volumetric Heat Source with Non-uniformly Heated Left Sidewall, Heat Transfer—Asian Research, Published online in Wiley Online Library (wileyonlinelibrary.com/journal/htj). DOI 10.1002/htj.21096, 2013.
27.Ali J. Chamkha, Salam Hadi Hussain, Farooq Hassan Ali and Ahmed Ali Shaker, Conduction-combined forced and natural convection in a lid-driven parallelogram-shaped enclosure divided by a solid partition, Progress in Computational Fluid Dynamics, Vol. 12, No. 5, 309-321, 2012.

28. Salam H. Hussain, Ahmed K. Hussein, H. H. Al-Kayiem and Hakan F. Oztop, Numerical Computation of Buoyancy Flow and Heat Transfer in Various Aspect Ratios Cavities Filled with Water. 15th International Conference on Applied Mechanics and Mechanical Engineering (AMME-15), Military Technical College, May 29-31, 2012, Egypt.

29.Salam H. Hussain, Ahmed K. Hussein, Natural Convection Heat Transfer Enhancement in a Differentially Heated Parallelogrammic Enclosure Filled with Copper-Water Nanofluid, ASME, Journal of Heat Transfer, August 2014, Vol. 136.
30.Hussain H. Al-Kayiem, Ahmed K. Hussein, Jalal M. Jaleel and Salam H. Hussain, Numerical Computation of 3-Dimensional Supersonic Flow Field over Seamless Missiles, Indian Journal of Science and Technology, Vol 7(10), 1563–1572, October 2014.
31. Salam Hadi Hussain, Ahmed Kadhim Hussein, and Kareema Abdul Kadim; Numerical Simulation of Natural Convection in a Parallelogrammic Enclosure Containing Volumetric Heat Source with Non-uniformly Heated Left Sidewall. Journal of heat Transfer Asian-Research, Vol.43, No.6, pp:542-560, 2014
32. Salam H. Hussain, Ahmed K. Hussein, Characteristics of Magnetohydrodynamic Mixed Convection In A Parallel Motion Two-Sided Lid- Driven Differentially Heated Parallelogrammic Cavity With Various Skew Angles, Journal of Thermal Engineering, Yildiz Technical University Press, Istanbul, Turkey Vol. 1, No. 3, pp. 221-235, July, 2015.
33. A. I. Alsabery, A. J. Chamkha , S. H. Hussain, H. Saleh, I. Hashim; Heatline Visualization of Natural Convection In a Trapezoidal Cavity Partly Filled With Nanofluid Porous Layer and Partly With Non-Newtonian Fluid Layer. Advanced Powder Technology, Vol. 26,1230-1244, 2015.
34. Salam H. Hussain, Ahmed Abbas Shahath; Effect of Salt Addition on the Drag Reduction by Cationic Surfactant, The Iraqi Journal For Mechanical and Materials Engineering , July, 2015.
35. Salam H. Hussain, Ahmed Abbas Shahath; Effect of Polymer Type And Mixing of Polymers on Drag Reduction In Turbulent Pipe Flow, Journal of Babylon University , Vol.24, No.1, 2015.
36. Salam H. Hussain, Ahmed K. Hussein, Heatline visualization of natural convection heat transfer in an inclined wavy cavities filled with nanofluids and subjected to a discrete isoflux heating from its left sidewall, Alexandria Engineering Journal (2016) 55,169-186.
37. Salam H. Hussain; Analysis of heatlines and entropy generation during double-diffusive MHD natural convection within a tilted sinusoidal corrugated porous enclosure, Engineering Science and Technology, Engineering Science and Technology an International Journal, (2016)19,926-945
38. A. I. Alsabery, H. Saleh, I. Hashim; and S. H. Hussain, Darcian Natural Convection in Inclined Square Cavity Partially Filled Between the Central Square Hole Filled with a Fluid and Inside a Square Porous Cavity Filled with Nanofluid, Journal of Applied Fluid Mechanics , Vol. 9, No. 4, pp. 1763-1775, 2016.
39. Ahmed Kadhim Hussein, Salam Hadi Hussain, Sumon Saha, Goutam Saha and M. Hasanuzzaman, Effects of a Longitudinal Magnetic Field and Discrete Isoflux Heat Source Size on Natural Convection inside a Tilted Sinusoidal Corrugated Enclosure, J. Basic. Appl. Sci. Res., 3(10) 402-415, 2013
40. Ammar I. Alsabery, Salam H. Hussain, Habibis Saleh and Ishak Hashim, Inclination Angle Effect on Natural Convection in a Square Cavity Partially Filled with Non-Newtonian Fluids Layer, AIP Conference Proceedings 1678, 060007 (2015); doi: 10.1063/1.4931334.
41. Salam Hadi Hussain, Numerical Investigation Of The Enhanced Heat Transfer Due To Curvature–Induced Lateral Vortices In Laminar Flows Over Sinusoidal Corrugated-Plate Channels, Al-Qadisiya Journal For Engineering Sciences, Vol. 2, No. 2, 2009

المشاركات في المجتمع الاكاديمي

شاركت في العديد من المؤتمرات العلمية العالمية والتي اقيمت في ماليزيا وتركيا واليابان ومصر وسنغافورة ولي العديد من البحوث العلمية العالمية والمنشورة في مجلات عالمية رصينة ذات معامل تاثير وتقع اغلبها ضمن المحرك البحثي العالمي سكوبس وثومبسون رويتر

معلومات اخرى

حصلت على تكريم وزارة التعليم العالي والبحث العلمي في فقرة التدريسيين المتميزين في فقرة النشر العالمي ولمرات عديدة كما حصلت على العديد من كتب الشكر والتقدير من وزير التعليم العالي والبحث العلمي المحترم والسيد رئيس جامعة بابل المحترم