انت هنا الان : شبكة جامعة بابل > تطبيق مواقع التدريسيين > محسن عباس اسود الزهيري > السيرة المهنية

في الموقع



محسن عباس اسود الزهيري

المعلومات الشخصية
PhD/ Manchester University in UK/2012
MsC/Babylon Unversity in Iraq/2003
BsC/ Babylon Unversity in Iraq/2001

Advanced Ceramics, Materials, Mechanical testing for materials, Fracture mechanics, residual stress in high temperature ceramic, Microstructure, Digital image correlation ,

السيرة المهنية

Curriculum Vitae

Contact Address: Email: mohsin.aswad@oubabylon.edu.iq
University of Babylon mohsin.aswad@gmail.com
College of Materials Engineering Mobile Phone No.: +964(0)7812036763
P.O. Box 4 +964(0)7802520300
Hilla
Babylon
Iraq

Dr. Mohsin Abbas Aswad

Education 17th September, 2007 The University of Manchester, United Kingdom
PhD researcher (In view) , 2:1

Sp Research Interests
20th March, 2012: University of Manchester, Manchester, United Kingdom-Faculty of Engineering-School of Materials. PhD. Materials Engineering

Modules include: Recrystallized alumina is used as a high performance crucible material. Its thermal shock resistance is known to be affected by component shape, and also by processing variables, since the defects and internal stress at both the microscale (i.e. between grains due to anisotropic crystal properties) and macroscale (i.e. due to differential shrinkage during sintering) influence the fracture strength. The aim of this thesis is to study the nucleation and growth of defects in pure alumina and Cr-doped alumina, and to investigate how their behavior is affected by residual stresses, such those introduce by thermal expansion of the crystal grains. Digital image correlation is applied to polycrystalline aluminas (i.e. Cr-doped alumina and pure alumina with average grain 3.6 ?m and 1.5 ?m respectively) that are stressed in an optical microscope. The defect size and the surface crack opening displacement were measured using digital image correlation. The distribution and population of crack nucleating defects were obtained by in-situ observation of the stressed surface and by analysis with digital image correlation. These data are then compared with independent measurements of the defect population using Hertzian indentation, from which defect populations are derived for the pure and Cr-doped alumina samples. Grain boundary plane and grain orientations in the vicinity of crack nuclei were characterized by electron microscopy. Crack nuclei were shown to develop at boundaries predicted to have high tensile thermal strains, caused by the orientation of the grain boundary plane relative to the adjacent grains, such as basal plane grain facets. The techniques of focused ion beam (FIB) milling and electron backscatter diffraction (EBSD) characterization of the crystallographic orientations and structure of cracked grain boundaries were used to provide data for a model to explain the cracking of these boundaries as a result of the thermal strains and the anisotropic thermal expansion behavior of alumina.

Thesis: Residual Stress and Fracture in High Temperature Ceramics


18th March, 2003: University of Babylon, Hilla, Iraq- MSc. Materials Engineering , 2:2
Modules include: It was known from a long time that the hydrazine is considered as a hunter material for Oxygen, therefor, the hydrazine used to protect the vapor reactor in power plants from corrosion by hunting the Oxygen that causing corrosion, and in ether hand reducing the iron oxide in to magnetic iron oxide, also the hydrazine continuous in protection and keep this oxide by prevent the oxygen attack. The use of hydrazine hydrate (N2H4.H2O ) in vapor state (121°C) to study the effect on the following alloys and metals (carbon steel ,aluminum alloy G3/5052 , industrial oxide aluminum alloy , copper and brass alloy ). The hydrazine shows many interaction directions when deal with such metals. It is behave as reduced alkaline in dealing with steel and generate a layer of magnetic iron oxide steady in thermal state until (250°C) on the steel surface , this layer was suitable to receive a layer of paint and this is apart for study aims.

Thesis: Study of the effect of hydrazine vapor on metal surfaces.
June 2000-2001: University of Babylon, Hilla, Iraq – BSc. Materials Engineering 2:3
Final Modules include: Final Modules include: corrosion engineering and protection, Heat treatments Engineering, Metallurgy engineering, Fracture mechanics, Mechanical behavior of Materials, Advanced Ceramic Engineering, Characteristics of Materials Engineering, Mathematics, Metals and Polymer Engineering, Materials Engineering, Quality Control Engineering, Bio-ceramics Materials Engineering, Design and selective of Materials Engineering, Glass and Refractories Engineering, Phase Diagram and Phase Transformations Engineering, Powder Technology and Sintering Engineering etc.
The Academic Experience:
I gave the following courses for B.Sc. and M.Sc. levels;
1) Teaching the Mathematics for the 1st Stage in Engineering College / Department of Materials Engineering.
2) Engineering Drawing. 1st. Year B.Sc. Materials. Eng.
3) Materials Science. 1st. Year B.Sc. Materials. Eng.
4) Advanced ceramics. 4th.Year B.Sc. Ceramics Eng. and Building Materials.
5) Metals and Polymer. 2th. Year B.Sc. Ceramics Eng. and Building Materials
6) Introduction of ceramic Materials.2nd.Year B.Sc. Ceramics Eng. and Building Materials
7) Characteristics of ceramic Materials .3rd.Year B.Sc. Ceramics Eng. and Building Materials
8) Fracture Mechanics.3rd.Year B.Sc. Ceramics Eng. and Building Materials
9) Composite Materials.3rd.Year B.Sc. Ceramics Eng. and Building Materials
10) Fracture Mechanics. M.Sc. Level. Ceramics Eng. and Building Materials.
11) Composite Materials. .M.Sc. Level. Department of Ceramics Eng. and Building Materials. University of Babylon.
12) Mechanical behavior of Ceramics….High Diploma Level. Department of Ceramics Engineering and Building Materials/ University of Babylon
Supervision
1. More than 55 B.Sc. projects in the field of Materials engineering at Department of Materials Engineering / Faculty of Engineering/ University of Babylon and Department of Ceramics Engineering and Building Materials.
2. Ten M.Sc. theses in the fields of ceramics engineering and building materials, Advanced Ceramics, Preparation of advanced ceramics, Refractories, Porous medium, Fracture Mechanics, Digital image correlation.


Computer Experience

I have a good computer experience in both software and programming. I supervised many graduation projects and B.Sc. and M.Sc. theses where computer programs are developed to model many engineering problems by using Digital Image Correlation, Finite Element method, Excel and Word programs.
Publications
Journal Papers

1. T. James Marrow, David Gonzalez, Mohsin Aswad, Joao Quinta da Fonseca, Philip J. Withers, 2011: In-situ observation and modelling of intergranular cracking in polycrystalline alumina. Journal of Key Engineering Materials Vol. 465, pp 560-563.
2. M.A. Aswad , T.J. Marrow, 2012, Intergranular crack nuclei in polycrystalline alumina, Journal: Engineering Fracture Mechanics 95 (2012) 29–36
3. Mohsin Abbas Aswad, 2013, Comparison of the Fracture Toughness of high temperature ceramic measured by Digital image correlation and Indention Method , Journal of Babylon University/ Engineering Sciences/ No.(6)/ Vol.(21), p:1-7.
4. M.M. Shukur, M.A. Aswad, Z.J. Kadhim, 2015, Preparation of Cordierite Ceramic from Iraqi Raw Materials, Journal: International Journal of Engineering and Technology, Vol. 5, No. 3.
5. Mohsin Abbas Aswad, 2015, Using Digital Image Correlation Method for Measuring Surface Crack Opening Displacement and Surface Crack Propagation and Crack Tip in Alpha Alumina, Journal of Babylon University/Engineering Sciences, No.(2)/ Vol.(23).
6. Alaa Hassan Fadhil, Mohsin A. Aswad, Ahmed O. Al-Roubaiy, 2016, THE STUDY OF THE THERMAL PROPERTIES TO SPINEL NICKEL ALUMINATE, Journal of Mechanical and Materials Engineering, Vol.16, No1.
7. Mohsin Abbas Aswad, Majid. M. Shukur, and Doaa Ahmad yaseen, 2017, Synthesis and Characterazation of the Mullite-Zirconia Composite Material, Journal of Babylon University/ Engineering Sciences / No.(1)/ Vol.(25).
8. Mohamed Mahdi Hussien, Mohsin A. Aswad, and Hayder K. Rashed, 2017, Investigation of Crack Propagation and Opening in Hydroxyapatite Using Digital Image Correlation, Journal of Engineering and applied sciences, 12 (special issue 6): 7935-7943.
9. Saba Mohamed Bader, Majid Muhi Shukur, and Mohsin Abbas Aswad, 2018, Preparation ceramic Filter using Rice husk and Yeast as pore forming agents, Advanced in Natural and Applied Science, Vol. (11), No. (11).
10. Majid. Muhi Shukur, Mohsin Abbas Aswad, and Saba Mohamed Bader, 2018, Effects of Sawdust and Rice husk Additives on Physical Properties of Ceramic Filter, Journal of University of Babylon, Engineering Sciences, Vol.(26), No.(1).
11. Amir N.saud, Mohsin A.Aswad, and Mohammed A. Ahmed Al-dujaili, 2018, Synthesis of Gamma Alumina for Catalyst Support Using Yeast Cell as Pore Forming Agent using Regression Model Journal of Engineering and Applied Sciences, Vol. 18, No.12-13.











Conference / Presentation Papers

1. M. A. Aswad and T. J. Marrow: Intergranular Crack Nucleation in Polycrystalline Alumina. 18th European Conference on Fracture, ECF 18, in Dresden, Germany August 30- September 03, 2010.
2. T. J. Marrow, M. A. Aswad, J. Q. Fonseca, and P. J. Withers, In-situ observation and modelling of intergranular cracking in polycrystalline alumina. Sixth international conference on Materials Structure & Micromechanics of Fracture (MSMF6), Brno, Czech Republic, June 28 - 30, 2010.
3. M. A. Aswad and T. J. Marrow: Residual stress and fracture in High temperature ceramics, Postgraduate Conference in Manchester University, UK, 2010.
4. M. A. Aswad and T. J. Marrow: MEASURING THE RESIDUAL STRESS IN ALUMINA USING FLOURESCENCE SPECTROSCOPE TECHNIQUES, , International Scientific Conference of the Faculty of Engineering/ University of Babylon, Iraq, 15-16, May, 2013.
5. M. A. Aswad and T. J. Marrow: Residual stress and fracture in High temperature ceramics, Postgraduate Conference in Manchester University, UK, 2013.
6. Al-dujaili, Mohammed A. Ahmed, Aswad, Mohsin Abbas & Saud, Amir Najah, (2017) Preparation of Macro- Porous Alumina via Organic Additive and Characterizations Physical Properties by Using a Genetic Algorithm Method, 17 IEEE First International Conference on Recent Trends of Engineering Science and Sustainability. University of Baghdad, [1st-ijrtess-2017]. May 17-19, 2017.
7. Mohsin Abbas Aswad, Mohammed Mahdi Hussein, and Hayder Kraidi Rashed, 2018, Preparation Characterization of Hydroxyapatite from Bovine Bone using Extraction Method, The 6th International Scientific Conference for Nanotechnology and Advanced Materials and their applications University of Technology, Nanotechnology Advanced Materials research Centre.

Book Authorship
Still working on Two books, Fracture Mechanics and Mechanical behavior of Materials

Scientific training Courses for
the staff in the manufacturing
companies
1. A Two Weeks Course for Building Materials/ the General Company for Transforming the Electricity Power.
2. A two Weeks Course for Materials Engineering and its properties/ the General Company for Transforming the Electricity Power and petrol company.
3. A Three Weeks Course for Corrosion and protection engineering in Babylon University.


The Committees and
Feasibility Studies

1. A member in Preparatory Committee of the 6th International Scientific Conference for Nanotechnology and Advanced Materials and their applications University of Technology, Nanotechnology Advanced Materials research Centre.
2. A member of Committee to Create the Maintenance Services Department in Babylon University.
3. A member of Scientific Committee and Postgraduate of Ceramics Engineering and Building Materials Department in Babylon University.
4. Submitting a feasibility Study to Establish Blacktop factory Financed by (International Montery Fund).
5. A member of Examinations Committee at Department of Ceramics College of Engineering Materials at the University of Babylon from 1/10/2013, 1/10/2016.


The Administrative Positions
1. The Rapporteur of the Materials Engineering Department/ College of Engineering/ University of Babylon from 2004 to 2007.
2. Director of the Laboratories in the Department of Materials Engineering for the Postgraduate Studies and Undergraduate/ Faculty of Engineering/ the University of Babylon from 2004 to 2006.
3. Director of Ceramic Engineering and Building Materials department in College of Engineering Materials at the University of Babylon from 1/10/2013 to 1/10/2016.
4. Director of Examinations Committee at Department of Ceramics Engineering and Building Materials/ Faculty of Materials Engineering since 2017 until now.
5. Director of Group Learning Committee / Faculty of Materials Engineering since 2017 until now.
6. Rapporteur of the Session at International Conference of Materials Engineering, 20-21 May, 2015, Third International Scientific Conference of the College of Materials Engineering, University of Babylon, Iraq.
7. Cluster computer Official of the Ceramics Engineering and Building Materials.
Scientific Courses at University
of Manchester, UK
1. Ceramics Engineering (2008-2009)
2. Fracture Mechanics (2008-2009)
3. Digital Image Correlation techniques
4. Aerospace Engineering workshop
5. Heat treatment Engineering

Professional Training/Certification

17th Nov. 2009 - Staff Training & Development Unit Graduate Teaching Assistant.
18th April 2008 -Introduction to Research in the University of Manchester, Faculty of Engineering and Physical Sciences
10Th Nov.2008 - Academic Writing / University of Manchester
5th Des.2008 - Effective Presentations Workshop
19Th Aug.2009 - Labview Software
15th April. 2009 - G-Learning workshop
27th April. 2009 - MATLAB software
13th September, 2009: - Certificates in Project & Operations Engineering
20th Jan.2010 - Digital Image Correlation workshop
7th October 2014 - Workshop Outline: ‘PASS Demystified’(PASS: Peer Assisted Study Scheme)
Heads of School, Senior Tutors, Lecturers, and Teaching Fellows/ University of
Manchester/ United Kingdom

Academic Roles

Reviewer in the following World Scientific Journals
1. Journal of Engineering and Technology/ University of Technology/Baghdad
2. The Iraqi Journal for Mechanical and Materials Engineering –Faculty of Engineering/ University of Babylon/ Babylon
3. Journal of Babylon University / Babylon
4. Journal of Al-Qadisiya for Engineering Science/ Al-Qadisiya





Reviewer in the International Conferences:

1) Second International Scientific Conference of the College of Materials Engineering/ University of Babylon.
2) Third International Scientific Conference of the Faculty of Engineering/ University of Babylon.
3) 17 IEEE First International Conference on Recent Trends of Engineering Science and Sustainability. University of Baghdad, [1st-ijrtess-2017]. May 17-19, 2017.
4) The 6th International Scientific Conference for Nanotechnology and Advanced Materials and their Applications University of Technology, Nanotechnology Advanced Materials research Centre, 2018.
5) FIRST BABYLON INTERNATIONAL CONFERENCE FOR ENGINEERING AND INFORMATION TECHNOLOGY (BICEIT) 2018, University of Babylon.

Reviewer in the International Patented
1) Improving the properties of Iraqi bauxite refractories by adding zircon as raw materials.
2) The possibility of using a plastic waste section or a section of tires residues or a mixture of them as a total substitute for natural sand in the production of light concrete mortar.
3) Suspended ceiling with suspended ceiling for two tunnels. Suspended ceiling has suspended bricks and supporting bricks and the ceiling blocks have a reinforced roof and the use of refractory bricks.
4) Manufacturing of green cement concrete from industrial wastes.
5) Manufacturing of nano-oxides by spraying method.


External and Internal Examinations for postgraduate students:
University of Babylon (M.Sc. 2016)
University of Babylon (M.Sc. 20160)
University of Technology (M.Sc. 2016)
University of Technology (PhD. 2017)
University of Technology (M.Sc. 2017 )
University of Babylon (M.Sc. 2017)
Professional Association:
? Federation Arab Scientific Research Council, Association of Nanotechnology and Materials Science.
? Member; Energy Institutes (EI), Iraq
? IEEE membership/ number
? Science Publishing Group
Hobbies I enjoy going to the gym & generally keeping fit, Swimming & Playing of Football







المشاركات في المجتمع الاكاديمي

1. T. James Marrow, David Gonzalez, Mohsin Aswad, Joao Quinta da Fonseca, Philip J. Withers, 2011: In-situ observation and modelling of intergranular cracking in polycrystalline alumina. Journal of Key Engineering Materials Vol. 465, pp 560-563.
2. M.A. Aswad , T.J. Marrow, 2012, Intergranular crack nuclei in polycrystalline alumina, Journal: Engineering Fracture Mechanics 95 (2012) 29–36
3. Mohsin Abbas Aswad, 2013, Comparison of the Fracture Toughness of high temperature ceramic measured by Digital image correlation and Indention Method , Journal of Babylon University/ Engineering Sciences/ No.(6)/ Vol.(21), p:1-7.
4. M.M. Shukur, M.A. Aswad, Z.J. Kadhim, 2015, Preparation of Cordierite Ceramic from Iraqi Raw Materials, Journal: International Journal of Engineering and Technology, Vol. 5, No. 3.
5. Mohsin Abbas Aswad, 2015, Using Digital Image Correlation Method for Measuring Surface Crack Opening Displacement and Surface Crack Propagation and Crack Tip in Alpha Alumina, Journal of Babylon University/Engineering Sciences, No.(2)/ Vol.(23).
6. Alaa Hassan Fadhil, Mohsin A. Aswad, Ahmed O. Al-Roubaiy, 2016, THE STUDY OF THE THERMAL PROPERTIES TO SPINEL NICKEL ALUMINATE, Journal of Mechanical and Materials Engineering, Vol.16, No1.
7. Mohsin Abbas Aswad, Majid. M. Shukur, and Doaa Ahmad yaseen, 2017, Synthesis and Characterazation of the Mullite-Zirconia Composite Material, Journal of Babylon University/ Engineering Sciences / No.(1)/ Vol.(25).
8. Mohamed Mahdi Hussien, Mohsin A. Aswad, and Hayder K. Rashed, 2017, Investigation of Crack Propagation and Opening in Hydroxyapatite Using Digital Image Correlation, Journal of Engineering and applied sciences, 12 (special issue 6): 7935-7943.
9. Saba Mohamed Bader, Majid Muhi Shukur, and Mohsin Abbas Aswad, 2018, Preparation ceramic Filter using Rice husk and Yeast as pore forming agents, Advanced in Natural and Applied Science, Vol. (11), No. (11).
10. Majid. Muhi Shukur, Mohsin Abbas Aswad, and Saba Mohamed Bader, 2018, Effects of Sawdust and Rice husk Additives on Physical Properties of Ceramic Filter, Journal of University of Babylon, Engineering Sciences, Vol.(26), No.(1).
11. Amir N.saud, Mohsin A.Aswad, and Mohammed A. Ahmed Al-dujaili, 2018, Synthesis of Gamma Alumina for Catalyst Support Using Yeast Cell as Pore Forming Agent using Regression Model Journal of Engineering and Applied Sciences, Vol. 18, No.12-13.











Conference / Presentation Papers

1. M. A. Aswad and T. J. Marrow: Intergranular Crack Nucleation in Polycrystalline Alumina. 18th European Conference on Fracture, ECF 18, in Dresden, Germany August 30- September 03, 2010.
2. T. J. Marrow, M. A. Aswad, J. Q. Fonseca, and P. J. Withers, In-situ observation and modelling of intergranular cracking in polycrystalline alumina. Sixth international conference on Materials Structure & Micromechanics of Fracture (MSMF6), Brno, Czech Republic, June 28 - 30, 2010.
3. M. A. Aswad and T. J. Marrow: Residual stress and fracture in High temperature ceramics, Postgraduate Conference in Manchester University, UK, 2010.
4. M. A. Aswad and T. J. Marrow: MEASURING THE RESIDUAL STRESS IN ALUMINA USING FLOURESCENCE SPECTROSCOPE TECHNIQUES, , International Scientific Conference of the Faculty of Engineering/ University of Babylon, Iraq, 15-16, May, 2013.
5. M. A. Aswad and T. J. Marrow: Residual stress and fracture in High temperature ceramics, Postgraduate Conference in Manchester University, UK, 2013.
6. Al-dujaili, Mohammed A. Ahmed, Aswad, Mohsin Abbas & Saud, Amir Najah, (2017) Preparation of Macro- Porous Alumina via Organic Additive and Characterizations Physical Properties by Using a Genetic Algorithm Method, 17 IEEE First International Conference on Recent Trends of Engineering Science and Sustainability. University of Baghdad, [1st-ijrtess-2017]. May 17-19, 2017.
7. Mohsin Abbas Aswad, Mohammed Mahdi Hussein, and Hayder Kraidi Rashed, 2018, Preparation Characterization of Hydroxyapatite from Bovine Bone using Extraction Method, The 6th International Scientific Conference for Nanotechnology and Advanced Materials and their applications University of Technology, Nanotechnology Advanced Materials research Centre.


معلومات اخرى

لاتوجد